TEAC CRH500NT Owners Manual - Page 33
Radio Text
View all TEAC CRH500NT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
RDS The Radio Data System (RDS) is a broadcasting service which allows stations to send additional information along with the regular radio programme signal. RDS works on the FM waveband in Europe only. TRAFFIC ANNOUNCE When you select "TRAFFIC ANNOUNCE", "TRAFFIC ANNOUNCE" will blink for 3 seconds and then the unit searches for a traffic announcement. 1 Tune in an FM station (see page 30). 2 Press the RDS button. < When a traffic programme is found, the TRAFFIC ANNOUNCE mode is switched to PROGRAM SERVICE mode. If the station currently selected is transmitting a traffic programme signal, the RDS mode will be switched to PROGRAM SERVICE mode without searching for a traffic programme. ENGLISH Each time the RDS button is pressed, the RDS mode is changed as follows: PROGRAM SERVICE When you select "PROGRAM SERVICE", "PROGRAM SERVICE" will blink for about 3 seconds and then the programme service name or a station's name will be displayed. If there is no programme service data, the frequency will be displayed. PROGRAM TYPE When you select "PROGRAM T YPE", "PROGRAM TYPE" will blink for about 3 seconds and then the programme type will be displayed. CLOCK TIME Displays the information about times provided from the station. When you select "CLOCK TIME", "RDS CLOCK TIME" will blink for about 3 seconds and then the clock time will be displayed. RADIO TEXT When you select "RADIO TEXT", "RDS RADIO TEXT" will blink for about 3 seconds and then the news of stations composed of up to 64 symbols will be displayed. If there is no radio text data, RDS mode will be automatically switched to PROGRAM SERVICE mode. The clock setting of this unit is automatically adjusted according to the CLOCK TIME (CT) data. If you tune in an RDS station broadcasting incorrect CT data, the clock might be wrongly adjusted, and that may eventually affect the timer operation. When you do not want the clock of this unit to be set according to the CT data, turn off the auto clock adjustment. < No matter which RDS mode is selected, the unit receives CT data and adjusts the clock. To turn off the auto clock adjustment, hold down the RDS button for more than 8 seconds. < To turn on the auto clock adjustment again, hold down the RDS button for more than 8 seconds. < When the auto clock adjustment is turned off, CLOCK TIME is not displayed. 33 EN_CR-H500NT_T_C.indb 33 09.10.6 5:31:36 PM