TEAC CRH500NT Owners Manual - Page 6

MP3 and WMA iPod Compatibility < This unit can play MP3 files recorded in various external USB storage devices such as USB flash memory, MP3 player or HDD. The HDD must be formatted FAT 16 or FAT 32, but not NTFS. < When more than 2000 files are recorded on the USB memory, the unit might not be able to play them correctly. < File names of MP3 or WMA should be alphanumeric characters. This unit cannot display symbols and fullsize or double-byte characters (such as Japanese, Chinese, etc.) correctly. Also, be sure to use the file extension. (".mp3" for MP3 files, ".wma" for WMA files.) This unit can be connected to and used with the following iPod models. iPod (5th generation) iPod classic iPod nano (1st to 5th generation) iPod touch (1st to 3rd generation) < You cannot use following models in "Direct Mode" of Display mode and for the timer: iPod (5th generation) iPod nano (1st/2nd generation) See page 27 for information about Display mode. < MP3 files are mono or stereo MPEG-1 Audio Layer 3 format. This unit can play MP3 files with a sampling frequency of 44.1 kHz or 48 kHz, and a bit-rate of 320 kbps or less. < This unit cannot output video from a connected iPod. < To connect an iPod, use the USB cable supplied with the iPod. < This unit can play WMA files with a sampling frequency of 44.1 kHz and a bit-rate of 192 kbps or less. WMA stands for Windows Media Audio. < Audio encoded at 128 kbps should sound close to regular audio CD quality. Although this player will play lower bit-rate MP3 files, the sound quality becomes noticeably worse at lower bit-rates. < It cannot be played if you connect an iPod shuffle to this port. Compatible iPod Software In case your iPod will not work with the CR-H500NT or with the remote control unit, software update may solve the problem. Visit the Apple website and download the latest iPod software. 6 EN_CR-H500NT_T_C.indb 6 09.10.6 5:31:25 PM