TEAC DP-008 DP-008 Owner's Manual - Page 41
Basic Recording, Selecting the input source, Phantom power
View all TEAC DP-008 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
6 - Basic Recording Selecting the input source This unit has two inputs (INPUT A and INPUT B) that can be selected separately as input sources. The built-in mics (front panel MIC A and MIC B) or external input signals (inputs through the INPUT A and INPUT B jacks on the rear panel) can be selected as input sources. In addition to mic and line signals, the INPUT A 1/4" phone jack input can accept guitar input. Set the MIC/LINE-GUITAR switch on the rear panel according to the type of input. 1 Press the INPUT SETTING key to open the INPUT SETTING screen. Use the INPUT A and INPUT B items to set the input sources for the INPUT A and INPUT B. 2 Use the F3 (§) and F4 (¶) keys to select the INPUT A or INPUT B setting, and turn the DATA wheel to select the input source. INPUT A/B selection choices Choices Descriptoin Internal MIC Built-in MIC A/B (low / Low (default) sensitivity) Internal MIC Built-in MIC A/B (high / High sensitivity) Ext. Input, LINE / Low External input A/B (low sensitivity) Ext. Input / External input A/B Mid (middle sensitivity) Ext. Input / External input A/B High (high sensitivity) 3 After changing the setting, press the HOME key to return to the Home Screen. 4 If a source that uses the INPUT A connector is selected as the INPUT A input source in step 2 above, set the MIC/ LINE-GUITAR switch on the rear side panel appropriately. Set it to GUITAR when connecting an electric guitar or electric bass directly. Set it to MIC/LINE when inputting a mic or line signal. TIP When connecting an electric-acoustic guitar with a built-in preamp or an active electric guitar, as well as when connecting an electric guitar with effect boxes between it and this unit, set the MIC/LINE-GUITAR switch to MIC/LINE. Phantom power When connecting a condenser microphone that requires phantom power, follow the procedures below to turn phantom power ON. When phantom power is ON, phantom power is provided to both INPUT A and INPUT B XLR jacks. 1 When the recorder is stopped, press the PHANTOM key to open the PHANTOM screen. Indicator TASCAM DP-008 41