TEAC DP-008 DP-008 Owner's Manual - Page 65
Oscillator mode, key to display
View all TEAC DP-008 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
9 - Miscellaneous Functions To use the built-in mic, set the INPUT SETTING to Internal MIC. 3 When the recorder is stopped, press TUNER to open the TUNER screen. The value of the CALIB item (standard frequency) is selected. 6 When finished tuning, press the HOME key to return to the Home Screen. NOTE If you want to monitor the input sound, press the REC key of a track that has INPUT A assigned to it. Oscillator mode 1 When the recorder is stopped, press the TUNER key to open the TUNER screen. 4 Turn the DATA wheel to set the standard frequency of the A note between 435 and 445 Hz. The default setting is 440 Hz. 5 Play the instrument and begin tuning. The pitch name closest to the string appears above the meters. Tune the string roughly until the sound name that you want appears. Then, fine tune the string until the rectangle at the middle of the meter darkens, showing that the string is in tune. If the pitch is too low, a bar extends to the left of the middle and if it is too high it extends to the right. The more out of tune, the longer the bar appears. When the pitch played matches the note shown, the note name appears between the ¥˙ icons. 2 Press the F4 (OSC.) key to display the oscillator screen. The following settings can be made on this screen. CALIB Use this to adjust the standard frequency of A4. The setting range is 435Hz-445Hz. The default setting is 440Hz. NOTE Use this to set the note output. The setting range is C3-B5. The default setting is A4. LEVEL Use this to set the output level. The setting range is 10 (minimum) - 100 (maximum). TASCAM DP-008 65