TEAC DP-008 DP-008 Owner's Manual - Page 54
Locate and search functions, Direct locate function
View all TEAC DP-008 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
7 - Recorder Functions the song from the beginning. If you are not satisfied with the result because, for example, the balance between instruments is poor, or the pan settings are wrong, use the undo function (see "Undoing the last operation (single undo)" on page 50). If you are satisfied with the result, press the REC MODE key to open the RECORDER MODE screen and select MULTI TRACK, then press the HOME key to return to the Home Screen. After bouncing tracks, you can make new recordings over the other tracks. TIP If it is possible that you might need the original tracks at some later time, back-up the track data to a computer or copy the song before bouncing (see "Backing-up songs" on page 73 and "Connecting with a computer" on page 71). Locate and search functions value will carry over automatically when it reaches the highest or lowest value in a field. For example, when turning the DATA wheel to increase the value in the seconds field, the number will change from 59 to 0 and the minutes value will increase by one. The time display blinks when using the DATA wheel. The blinking stops when the recorder moves to the displayed position. 3 Press the HOME key to move to a different time division and turn the DATA wheel to change the value. 4 After setting the desired time value, press the playback (Á) key to start playback from that position. Return To Zero (RTZ) and Last Recording Position (LRP) Use simple key operations to return to the top of a song or to the position where recording last started. Direct locate function The current recorder position is shown at the top of the display as "hours: minutes: seconds: frames" (there are 30 frames per second). You can move the current recorder position to a specific time by inputting it here. 1 On the Home Screen, use the HOME key to move the cursor (underline) between time divisions. You can edit the value at the cursor positions. The seconds are selected in the following figure. Return To Zero (song beginning at 00:00:00:00) Press the Ô key while pressing and holding the stop (ª) key. Last Recording Position (the position recording last started) Press the key while pressing and holding the stop (ª) key. This function is useful when you want to record the same passage again. 2 Turn the DATA wheel to change the value above the cursor. When adjusting, the 54 TASCAM DP-008