TP-Link AV600 TL-PA6010KIT(EU) V1 User Guide 1910010845 - Page 24

TL-PA6010

AV600 Gigabit Powerline Adapter

18

¾

Simple Application Mapping:

The group allows you to choose what type of traffic with the highest

user priority you will use your local HomePlug device for by pitching one of the following radios.

Please select the radio type according to your demand.

¾

Advanced Priority Mapping:

The group sets VLAN priority to CAP mapping and default priority.

Note that in HomePlug, CAP 3 is the highest priority while CAP 0 is the lowest priority. The values

shown in VLAN Tags Priority are the default settings for the first running.

4.4 System

The

System

tab window is for some basic settings of the adapter. On this tab window, you can upgrade

the firmware to the latest version, reset the adapter’s settings to the factory defaults and configure all

adapters’ network names.

4.4.1 Upgrade Firmware

Click the

Upgrade Firmware

button to upgrade the version of the firmware for the adapter and the

following dialog will pop up.

Section	Page
Package Contents	7
Conventions	7
Chapter 1 Introduction	8
1.1 System Requirement	8
1.2 Important Safety Instructions	8
1.3 LED Indicator	9
1.4 Physical Interface	10
Chapter 2 Connecting Mechanism	12
2.1 Introduction	12
2.2 Connection Instruction	12
2.3 Hardware Connection – Computer	12
2.4 Hardware Connection – Internet	13
Chapter 3 Installing Management Utility	15
Chapter 4 Using the Management Utility	19
4.1 Status	19
4.1.1 Set Local Device’s Network Name	20
4.2 Network	21
4.2.1 Rename the Remote Device/Enter Password	21
4.2.2 Add Device	22
4.3 Advanced	23
4.4 System	24
4.4.1 Upgrade Firmware	24
4.4.2 Reset Device	25
4.4.3 Set All Devices’ Network Name	25
Chapter 5 Advanced Feature: How to Use the Pair Button	27
5.1 Pair (Secure with 128 bits-AES)	27
5.2 Set Up a Secured Powerline AV Network with the Pair Button	27

TP-Link AV600 TL-PA6010KIT(EU) V1 User Guide 1910010845 - Page 24

System, 4.4.1 Upgrade Firmware - reset

Page 24 highlights