TP-Link AV600 TL-PA6010KIT(EU) V1 User Guide 1910010845 - Page 25

Reset Device, 4.4.3 Set All Devices’ Network Name - instructions

Get TP-Link AV600 PDF manuals and user guides View all TP-Link AV600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

TL-PA6010 AV600 Gigabit Powerline Adapter z NVM: None-volatile memory. It is used for upgrading the firmware. z PIB: Parameter Information Block. It contains configuration values that establish device network identity, general capabilities and operational modes. If you want to upgrade the version of firmware for the device, please select appropriate Firmware and PIB files together. New firmware versions and PIB files are posted at www.tp-link.com and can be downloaded for free. ) Note: The parameter information of PIB will restore to the factory defaults after resetting the PLC. To upgrade the device's firmware, follow these instructions: 1. Download PIB file and firmware upgrade file from the TP-LINK website (www.tp-link.com). 2. Enter the path name or click corresponding blanks. to select the downloaded files on the computer into the 3. Click the OK button. ) Note: Do not turn off the device while the firmware is being upgraded. The device will reboot after the Upgrading has been finished. 4.4.2 Reset Device This Management Utility allows you to reset the Powerline Adapter to its default settings. z Reset Local Device: Click this button to reset the settings of the local Powerline Adapter device only. z Reset All Devices: Click this button to reset the settings of all devices that appear on the Network configuration homepage whose Device's Password had been entered for the same logical network. 4.4.3 Set All Devices' Network Name The Set All Devices' Network Name function allows you to change the logical network of all devices that appear on the Network configuration homepage whose Device's Password had been entered for 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
TL-PA6010
AV600 Gigabit Powerline Adapter
19
z
NVM
: None-volatile memory. It is used for upgrading the firmware.
z
PIB
: Parameter Information Block. It contains configuration values that establish device
network identity, general capabilities and operational modes.
If you want to upgrade the version of firmware for the device, please select appropriate Firmware and
PIB files together. New firmware versions and PIB files are posted at
www.tp-link.com
and can be
downloaded for free.
)
Note:
The parameter information of PIB will restore to the factory defaults after resetting the PLC.
To upgrade the device's firmware, follow these instructions:
1.
Download PIB file and firmware upgrade file from the TP-LINK website
(
www.tp-link.com
).
2.
Enter the path name or click
to select the downloaded files on the computer into the
corresponding blanks.
3.
Click the
OK
button.
)
Note:
Do not turn off the device while the firmware is being upgraded. The device will reboot after the
Upgrading has been finished.
4.4.2 Reset Device
This Management Utility allows you to reset the Powerline Adapter to its default settings.
z
Reset Local Device:
Click this button to reset the settings of the local Powerline Adapter device
only.
z
Reset All Devices:
Click this button to reset the settings of all devices that appear on the
Network
configuration homepage whose Device’s Password had been entered for the same
logical network.
4.4.3 Set All Devices’ Network Name
The
Set All Devices’ Network Name
function allows you to change the logical network of all devices
that appear on the
Network
configuration homepage whose Device’s Password had been entered for