TP-Link Archer BE9300 Archer BE9300USW V1.6 User Guide - Page 111
To Set up NAT, To change the Internet Port Negotiation Speed Setting, To enable Flow Controller
View all TP-Link Archer BE9300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Chapter 16 Customize Your Network Settings You have three options: • Use Default MAC Address - Do not change the default MAC address of your router in case the ISP does not bind the assigned IP address to the MAC address. • Clone Current Device MAC - Select to copy the current MAC address of the computer that is connected to the router, in case the ISP binds the assigned IP address to the MAC address. • Use Custom MAC Address - Select if your ISP requires you to register the MAC address and enter the correct MAC address in this field, in case the ISP binds the assigned IP address to the specific MAC address. • To Set up NAT The router's NAT (Network Address Translation) feature makes devices on the LAN use the same public IP address to communicate with devices on the internet, which protects the local network by hiding IP addresses of the devices. 1. If you want to enable NAT, tick the checkbox, and click SAVE. • To change the Internet Port Negotiation Speed Setting You can change the internet port speed mode. Auto Negotiation is recommended. • To enable Flow Controller With Flow Controller enabled, when a device gets overloaded it will send a PAUSE frame to notify the peer device to stop sending data for a specified period of time, thus avoiding the packet loss caused by congestion. Flow Controller is enabled by default. 107