TP-Link Archer BE9300 Archer BE9300USW V1.6 User Guide - Page 88
Advanced, VPN Server, Enable, Client IP Address, Allow Samba Network Place access
View all TP-Link Archer BE9300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Chapter 15 VPN Server&Client Step 1. Set up PPTP VPN Server on Your Router 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > VPN Server > PPTP, and tick the Enable box of PPTP. Note: Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or assign a static IP address for router's WAN port and synchronize your System Time with internet. 3. In the Client IP Address field, enter the range of IP addresses (up to 10) that can be leased to the devices by the PPTP VPN server. 4. Set the PPTP connection permission according to your needs. • Select Allow Samba (Network Place) access to allow your VPN device to access your local Samba server. • Select Allow NetBIOS passthrough to allow your VPN device to access your Samba server using NetBIOS name. • Select Allow Unencrypted connections to allow unencrypted connections to your VPN server. 5. Click SAVE. 6. Configure the PPTP VPN connection account for the remote device. You can create up to 16 accounts. 1 ) Click Add. 84