TP-Link Archer BE9300 Archer BE9300USW V1.6 User Guide - Page 39
To hide SSID, To change the security option, To change the transmit power, To change channel settings
![]() |
View all TP-Link Archer BE9300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Chapter 7 Wireless Settings 2. Create a new SSID in Network Name (SSID) and customize the password for the network in Password. The value is case-sensitive. Note: If you change the wireless settings with a wireless device, you will be disconnected when the settings are effective. Please write down the new SSID and password for future use. • To hide SSID: 1. Go to Wireless or Advanced > Wireless > Wireless Settings. 2. Select Hide SSID, and your SSID won't display when you scan for local wireless networks on your wireless device and you need to manually join the network. • To change the security option: 1. Go to Advanced > Wireless > Wireless Settings. 2. Select an option from the Security drop-down list. We recommend you don't change the default settings unless necessary. • To change the transmit power: 1. Go to Advanced > Wireless > Wireless Settings. 2. Select an option from the Transmit Power drop-down list: High, Middle or Low. The default and recommended setting is High. • To change channel settings: 1. Go to Advanced > Wireless > Wireless Settings. 2. Select a Channel Width (bandwidth) for the wireless network. It is recommended to just leave it as default. 3. Select an operating Channel for the wireless network. It is recommended to leave the channel to Auto if you are not experiencing the intermittent wireless connection issue. For the 6 GHz network, you can select the Enable PSC checkbox. When PSC (Preferred Scanning Channel) is enabled, only channels with higher connectivity will be reserved to ensure 6 GHz device connections. • To change the transmission mode: 1. Go to Advanced > Wireless > Wireless Settings. 2. For the 2.4 GHz and 5 GHz networks, disable Smart Connect, then select a transmission Mode according to your wireless client devices. It is recommended to just leave it as default. For the Mode of the 6 GHz network, please keep the default settings. 35
![](/manual_guide/products/tplink-archer-be9300-archer-be9300usw-v16-user-guide-2372f0e/39.png)