TP-Link Archer BE9300 Archer BE9300USW V1.6 User Guide - Page 120
Default Gateway, Interface, Description, Routing Table, below. If you can find the entry you've set
View all TP-Link Archer BE9300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Chapter 16 Customize Your Network Settings network is a single IP, so here enter 255.255.255.255. Default Gateway: The IP address of the gateway device to which the data packets will be sent. This IP address must be on the same subnet with the router's IP which sends out data. In the example, the data packets will be sent to the LAN port of Router B and then to the Server, so the default gateway should be 192.168.0.2. Interface: Determined by the port (WAN/LAN) that sends out data packets. In the example, the data are sent to the gateway through the LAN port of Router A, so LAN/ WLAN should be selected. Description: Enter a description for this static routing entry. 5. Click SAVE. 6. Check the Routing Table below. If you can find the entry you've set, the static routing is set successfully. Done! Open a web browser on your PC. Enter the company server's IP address to visit the company network. 116