TP-Link Archer C25 Archer C25EU V1 User Guide - Page 80
Advanced, Network, Internet, MAC Clone, Use Custom MAC, Address
View all TP-Link Archer C25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
• Make sure the physical connection between the router and the modem is proper • Clone the MAC address of your computer. 1 ) Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2 ) Go to Advanced > Network > Internet and focus on the MAC Clone section. 3 ) Choose an option to your need (Enter the MAC address if Use Custom MAC Address is selected), and click Save. Tips: • Some ISP will register the MAC address of your computer when you access the Internet for the first time through their Cable modem, if you add a router into your network to share your Internet connection, the ISP will not accept it as the MAC address is changed, so we need to clone your computer's MAC address to the router. • The MAC addresses of a computer in wired connection and wireless connection are different. • Modify the LAN IP address of the router. Note: Most TP-LINK routers use 192.168.0.1/192.168.1.1 as their default LAN IP address, it may conflict with the IP range of your existent ADSL modem/router. If so, the router is not able to communicate with your modem and cause you can't access the Internet. To resolve this problem, we need to change the LAN IP address of the router to avoid such conflict, for example, 192.168.2.1. 77