TP-Link Archer C58HP Archer C58HPUN V1 User Guide - Page 11
minutes, Method 1: Wired, Method 2: Wirelessly
View all TP-Link Archer C58HP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Chapter 2 Connect to the Internet 1. Follow the steps below to connect your router. If your internet connection is through an Ethernet cable from the wall instead of through a DSL / Cable / Satellite modem, connect the Ethernet cable directly to the router's WAN port, and then follow Step 4 and 5 to complete the hardware connection. Modem 1 2 4 3 1 ) Turn off the modem, and remove the backup battery if it has one. 2 ) Connect the modem to the WAN port on your router with an Ethernet cable. 3 ) Turn on the modem, and then wait about 2 minutes for it to restart. 4 ) Connect the power adapter to the router and turn on the router. 5 ) Verify that the hardware connection is correct by checking these LEDs. WPS LAN WAN PWR 2.4G 5G RE ON ON ON ON Tips: If the 2.4G or 5G LED is off, press and hold the Wi-Fi On/Off button until it is on. 2. Connect your computer to the router. • Method 1: Wired Turn off the Wi-Fi on your computer and connect the devices as shown below. Ethernet cable • Method 2: Wirelessly 1 ) Find the SSID (Network Name) and Wireless Password printed on the label at the bottom of the router. 8