TP-Link Archer C58HP Archer C58HPUN V1 User Guide - Page 7
The Back Panel
View all TP-Link Archer C58HP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Chapter 1 Get to Know About Your Router The router's LEDs (view from left to right) are located on the front panel. You can check the router's working status by following the LED Explanation table. LED Explanation Name WPS LAN WAN PWR 2.4G/5G RE Status On/Off Blinking On Off White on Orange on Off On Blinking Off On Off Blinking On Indication This light remains on for 5 minutes when a WPS connection is established, and then turns off. WPS connection is in progress. This may take up to 2 minutes. At lease one LAN port is connected to a powered-on device. No LAN port is connected to a powered-on device. The internet is available. The router's WAN port is connected, but the internet is not available. The router's WAN port is not connected. Power is on. The system is starting up or firmware is being upgraded. Do not disconnect or power off the router. Power is off. The corresponding wireless function (2.4G/5G) is working normally. The corresponding wireless function (2.4G/5G) is disabled. The router is connecting to the host wireless network. This may take up to 2 minutes. The router is working in Repeater mode and connected to the host wireless network. 1. 2. 2. The Back Panel The following parts (view from left to right) are located on the rear panel. Item PWR Port Power On/Off Button Description For connecting the router to a power socket via the provided power adapter. For powering on or off the router. 4