Home » TP-Link Manuals » Bridges & Routers » TP-Link Archer C6 » Manual Viewer

TP-Link Archer C6 Archer C6US V2 User Guide - Page 71

Advanced, Network, DHCP Server, Enable DHCP Server, IP Address Pool, Default Gateway

Add to My Manuals
Save this manual to your list of manuals

Page 71 highlights

Chapter 13 Customize Your Network Settings devices from the IP Address Pool. You can change the settings of the DHCP Server if necessary, and you can reserve LAN IP addresses for specified client devices. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Network > DHCP Server. • To specify the IP address that the router assigns: 1. Tick the Enable DHCP Server checkbox. 2. Enter the starting and ending IP addresses in the IP Address Pool. 3. Enter other parameters if the ISP offers. The Default Gateway is automatically filled in and is the same as the LAN IP address of the router. 4. Click Save. • To reserve an IP address for a specified client device: 1. Click Add in the Address Reservation section. 67

Section	Page
About This Guide	5
Get to Know About Your Router	7
1. 1. Product Overview	8
1. 2. Appearance	8
1. 2. 1. The Front Panel	8
1. 2. 2. The Back Panel	9
Connect the Hardware	11
2. 1. Position Your Router	12
2. 2. Connect Your Router	12
Log In to Your Router	15
Set Up Internet Connection	17
4. 1. Use Quick Setup Wizard	18
4. 2. Manually Set up Your Internet Connection	18
4. 3. Set Up an IPv6 Internet Connection	22
4. 4. Configure the Router in Access Point Mode	25
TP-Link Cloud Service	27
5. 1. Register a TP-Link ID	28
5. 2. Change Your TP-Link ID Information	28
5. 3. Manage the User TP-Link IDs	29
5. 3. 1. Add TP-Link ID to Manage the Router	30
5. 3. 2. Remove TP-Link ID(s) from Managing the Router	30
5. 4. Manage the Router via the TP-Link Tether App	31
OneMeshTM with Seamless Roaming	32
6. 1. Set Up a OneMeshTM Network	33
6. 2. Manage Devices in the OneMeshTM Network	34
Guest Network	37
7. 1. Create a Network for Guests	38
7. 2. Customize Guest Network Options	39
Parental Controls	41
8. 1. Set Up Access Restrictions	42
8. 2. Monitor Internet Usage	44
QoS	46
Network Security	48
10. 1. Protect the Network from Cyber Attacks	49
10. 2. Access Control	50
10. 3. IP & MAC Binding	51
NAT Forwarding	53
11. 1. Translate Address and Port by ALG	54
11. 2. Share Local Resources on the Internet by Virtual Servers	55
11. 3. Open Ports Dynamically by Port Triggering	56
11. 4. Make Applications Free from Port Restriction by DMZ	57
11. 5. Make Xbox Online Games Run Smoothly by UPnP	58
VPN Server	60
12. 1. Use OpenVPN to Access Your Home Network	61
12. 1. 1. Step1. Set up OpenVPN Server on Your Router	61
12. 1. 2. Step 2. Configure OpenVPN Connection on Your Remote Device	62
12. 2. Use PPTP VPN to Access Your Home Network	62
12. 2. 1. Step 1. Set up PPTP VPN Server on Your Router	63
12. 2. 2. Step 2. Configure PPTP VPN Connection on Your Remote Device	64
Customize Your Network Settings	68
13. 1. Change the LAN Settings	69
13. 2. Configure to Support IPTV Service	69
13. 3. Specify DHCP Server Settings	70
13. 4. Set Up a Dynamic DNS Service Account	72
13. 5. Create Static Routes	74
13. 6. Specify Wireless Settings	76
13. 7. Use WPS for Wireless Connection	78
13. 7. 1. Set the Router’s PIN	78
13. 7. 2. Use the WPS Wizard for Wi-Fi Connections	79
13. 8. Schedule Your Wireless Function	79
13. 9. TxBF, MU-MIMO	81
Manage the Router	82
14. 1. Set Up System Time	83
14. 2. Control LEDs	84
14. 3. Test the Network Connectivity	85
14. 4. Upgrade the Firmware	86
14. 5. Backup and Restore Configuration Settings	87
14. 6. Set the Router to Reboot Regularly	88
14. 7. Change the Login Password	89
14. 8. Password Recovery	90
14. 9. Local Management	91
14. 10. Remote Management	92
14. 11. System Log	93
14. 12. Monitor the Internet Traffic Statistics	95
14. 13. Configure the System Parameters	96
14. 13. 1. Wireless Advanced	96
14. 13. 2. WDS	97
14. 13. 3. WPS	98
14. 13. 4. NAT	99
14. 13. 5. DoS Protection	99
14. 13. 6. Duplex	100
Work with Alexa	101