TP-Link Archer C6 Archer C6US V2 User Guide - Page 98
WPS, Disable DHCP
View all TP-Link Archer C6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Chapter 14 Manage the Router of the root router is 192.168.0.1, the IP address of the extended router can be 192.168.0.2~192.168.0.254. We take 192.168.0.2 as example.) 2 ) Click Save. Note: Log in to the web management page again if the IP address of the router is altered. 3. Survey the SSID to be bridged: 1 ) Go to Advanced > System Tools > System Parameters, focus on the 2.4GHz WDS section and click Enable WDS Bridging. 2 ) Click Survey, locate the root router's SSID and click Choose (Here we take TP-Link_4F98 as example). 3 ) If the root router has wireless password, you should enter the wireless password of the root router. 4 ) Click Save. 4. Disable DHCP: 1 ) Go to Network > DHCP Server. 2 ) Deselect Enable DHCP Server and click Save. Now you can go to Advanced > Status > Wireless to check the WDS status. When the WDS status is Run, it means WDS bridging is successfully built. 14. 13. 3. WPS Enable this function to easily set up and connect your WPS-enabled devices to your Wi-Fi at a push of the WPS button. 94