TP-Link CPE220 CPE520 V1.1 Installation Guide - Page 14
LAN Settings: Change the IP Address to 192.168.0.Xranges
![]() |
View all TP-Link CPE220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
3. LAN Settings: Change the IP Address to 192.168.0.X (X ranges between 2 and 253), the same subnet with the access point, and click Next. 4. Wireless Client Settings: a. Click Survey and select the SSID of the Access Point in the AP list, then click Connect. b. Select WPA-PSK/WPA2-PSK from the Security option, enter the same PSK password and distance value of the Access Point, then click Next. 5. Finish: Verify your settings and click Finish to complete the configuration. 11
![](/manual_guide/products/tplink-cpe520-cpe520-v11-installation-guide-cb1c7a6/14.png)
11
3.
LAN Settings: Change the IP Address to 192.168.0.X (X ranges
between 2 and 253), the same subnet with the access point, and
click
Next
.
4.
Wireless Client Settings:
a.
Click
Survey
and select the SSID of the Access Point in the AP list,
then click
Connect
.
b.
Select
WPA-PSK/WPA2-PSK
from the Security option, enter the
same PSK password and distance value of the Access Point, then
click
Next
.
5.
Finish: Verify your settings and click
Finish
to complete the
configuration.