TP-Link CPE220 CPE520 V1.1 Installation Guide - Page 20
with large radio noise. In this example, the recommended channel
View all TP-Link CPE220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Stop. Note that the relatively low and continuous part of the average curve indicates less radio noise. Here, we use the figure below as an example. CPE510 and CPE520 have a select box of Frequency Range at the top-left corner. Select the required range and then click Start. When choosing channel/frequency, you should avoid the spectrum with large radio noise. In this example, the recommended channel/ frequency is 1/2412MHz and 6/2437MHz. 17
17
Stop
. Note that the relatively low and continuous part of the
average curve indicates less radio noise. Here, we use the figure
below as an example.
CPE510 and CPE520 have a select box of Frequency Range at the top-left corner.
Select the required range and then click Start.
When choosing channel/frequency, you should avoid the spectrum
with large radio noise. In this example, the recommended channel/
frequency is 1/2412MHz and 6/2437MHz.