TP-Link T1500-28PCT TL-SL2428P T1500-28PCT V1 CLI Reference Guide - Page 163
ip igmp snooping multi-vlan-config
View all TP-Link T1500-28PCT TL-SL2428P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
port-list -- The list of Ethernet ports. Command Mode Global Configuration Mode Example Enable the IGMP Snooping function and modify Router Port Time as 300 seconds, Member Port Time as 200 seconds for VLAN 1-3, and set the Leave time as 15 seconds for VLAN 1-2: T1500-28PCT(config)# ip igmp snooping v lan-config 1-3 rtime 300 T1500-28PCT(config)# ip igmp snooping v lan-config 1-3 mtime 200 T1500-28PCT(config)# ip igmp snooping v lan-config 1-2 ltime 15 Add static multicast IP address 225.0.0.1, which corresponds to VLAN 2, and configure the forward port as port 1-3: T1500-28PCT(config)# ip igmp snooping vlan-config 2 static 225.0.0.1 interface fastEthernet 1/0/1-3 ip igmp snooping multi-vlan-config Description The ip igmp snooping multi-vlan-config command is used to create Multicast VLAN. To delete the corresponding Multicast VLAN, please use no ip igmp snooping multi-vlan-config command. Syntax ip igmp snooping multi-vlan-config [ vlan-id ] [ rtime router-time | mtime member-time | ltime leave-time | rport interface { fastEthernet port | gigabitEthernet port } ] no ip igmp snooping multi-vlan-config Parameter vid -- The ID of the VLAN desired to modify configuration, ranging from 2 to 4094. router-time -- Router Port Time. Within this time, if the switch does not receive IGMP query message from the router port, it will consider this port is not a router port any more. Router Port Time ranges from 60 to 600 in seconds. By default, it is 300. member-time -- Member Port Time. Within this time, if the switch does not receive IGMP report message from the member port, it will consider this port is 152