TP-Link T1500-28PCT TL-SL2428P T1500-28PCT V1 CLI Reference Guide - Page 57
clear logging
View all TP-Link T1500-28PCT TL-SL2428P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
remotely monitor the settings and operation status of other devices through the log host. Syntax logging host index idx host-ip level no logging host index idx Parameter idx -- The index of the log host. The switch supports 4 log hosts at most. host-ip -- The IP for the log host. level -- The severity level of the log information sent to each log host. There are 8 severity levels marked with values 0-7. The smaller value has the higher priority. Only the log with the same or smaller severity level value will be sent to the corresponding log host. By default, it is 6 indicating that the log information marked with 0~6 will be sent to the log host. Command Mode Global Configuration Mode Example Enable log host 2 and set its IP address as 192.168.0.148, the level 5: T1500-28PCT(config)# logging host index 2 192.168.0.148 5 clear logging Description The clear logging command is used to clear the information in the log buffer and log file. Syntax cle ar logging [ buffer | flash ] Parameter buffer | flash -The output channels: buffer and flash. Clear the information of the two channels, by default. Command Mode Global Configuration Mode 46