TP-Link T1500-28PCT TL-SL2428P T1500-28PCT V1 CLI Reference Guide - Page 98
storm-control multicast
![]() |
View all TP-Link T1500-28PCT TL-SL2428P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
no storm-control broadcast Parameter rate -- Specify the bandwidth for receiving broadcast packets on the port. The packet traffic exceeding the bandwidth will be discarded. By default, the value is "128K". Command Mode Interface Configuration Mode (interface fastEthernet / interface range fastEthernet / interface gigabitEthernet / interface range gigabitEthernet) Example Enable the broadcast control function for port 5: T1500-28PCT(config)# interface fastEthernet 1/0/5 T1500-28PCT(config-if)# storm-control broadcast storm-control multicast Description The storm-control multicast command is used to enable the multicast control function. To disable the multicast control function, please use no storm-control multicast command. Multicast control function allows the switch to filter multicast in the network. If the transmission rate of the multicast packets exceeds the set bandwidth, the packets will be automatically discarded to avoid network broadcast storm. Syntax storm-control multicast [rate rate] no storm-control multicast Parameter rate -- Select the bandwidth for receiving multicast packets on the port. The packet traffic exceeding the bandwidth will be discarded. By default, the value is "128K". Command Mode Interface Configuration Mode (interface fastEthernet / interface range fastEthernet / interface gigabitEthernet / interface range gigabitEthernet) Example Enable the multicast control function for port 5: T1500-28PCT(config)# interface fastEthernet 1/0/5 87
![](/manual_guide/products/tplink-t150028pct-tlsl2428p-t150028pct-v1-cli-reference-guide-920b434/98.png)