TP-Link T1600G-28TSTL-SG2424 T1600G-28TS V1 User Guide - Page 223
Primary IP, Secondary IP, Auth Port, Key Modify, Auth Key, Accounting, Accounting Port, Accounting
View all TP-Link T1600G-28TSTL-SG2424 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 223 highlights
The following entries are displayed on this screen: Authentication Config Primary IP: Enter the IP address of the authentication server. Se condary IP: Enter the IP address of the alternate authentication server. Auth Port: Set the UDP port of authentication server(s). The default port is 1812. Key Modify: Select to modify the authentication key. Auth Key: Set the shared password for the switch and the authentication servers to exchange messages. Accounting Config Accounting: Enable/Disable the accounting feature. Primary IP: Enter the IP address of the accounting server. Se condary IP: Enter the IP address of the alternate accounting server. Accounting Port: Set the UDP port of accounting server(s). The default port is 1813. Key Modify: Select to modify the accounting key. Accounting Key: Set the shared password for the switch and the accounting servers to exchange messages. Note : 1. The 802.1X function takes effect only when it is enabled globally on the switch and for the port. 2. The 802.1X function cannot be enabled for LAG member ports. That is, the port with 802.1X function enabled cannot be added to the LAG. 3. The 802.1X function should not be enabled for the port connected to the authentication server. In addition, the authentication parameters of the switch and the authentication server should be the same. Configuration Procedure: Step Operation De scription 1 Connect an authentication Required. Record the information of the client in the LAN to server to the switch and do the authentication server and configure the corresponding some configuration. authentication username and password for the client. 2 Install the 802.1X client Required. For the client computers, you are required to software. install the TP-LINK 802.1X Client provided on the CD. Please refer to the software guide in the same directory with the software for more information. 3 Configure the 802.1X Required. By default, the global 802.1X function is disabled. globally. On the Network Security→802.1X→Global Config page, configure the 802.1X function globally. 4 Configure the parameters of Required. On the Network Security→802.1X→RADIUS the authentication server Config page, configure the parameters of the server. 214