TP-Link T1600G-28TSTL-SG2424 T1600G-28TS V1 User Guide - Page 49
Application Example 1 for SSH
View all TP-Link T1600G-28TSTL-SG2424 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Idle Timeout: Specify the idle timeout time. The system will automatically release the connection when the time is up. The default time is 120 seconds. Max Connect: Specify the maximum number of the connections to the SSH server. No new connection will be established when the number of the connections reaches the maximum number you set. The default value is 5. Encryption Algorithm Check the box to enable the corresponding encryption algorithm. Data IntegrityAlgorithm Check the box to enable the corresponding data integrity algorithm. Key Download Key Type: Select the type of SSH Key to download. The switch supports two types: SSH-2 RSA/DSA and SSH-1 RSA. Key File: Download: Please ensure the key length of the downloaded file is in the range of 512 to 3072 bits. Click the Download button to download the desired key file to the switch. Note : 1. It will take a long time to download the key file. Please wait without any operation. 2. After the Key File is downloaded, the user's original key of the same type will be replaced. The wrong downloaded file will result in the SSH access to the switch via Password authentication. Application Example 1 for SSH: Network Requirements 1. Log on to the switch via password authentication using SSH and the SSH function is enabled on the switch. 2. PuTTY client software is recommended. Configuration Procedure 1. Open the software to log on to the interface of PuTTY. Enter the IP address of the switch into Host Name field; keep the default value 22 in the Port field; select SSH as the Connection type. 40