TP-Link T1600G-28TSTL-SG2424 T1600G-28TS V1 User Guide - Page 39
Boot Config
View all TP-Link T1600G-28TSTL-SG2424 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
4.3.1 Boot Config On this page you can configure the boot file of the switch. When the switch is powered on, it will start up with the startup image. If it fails, it will try to start up with the backup image. If this fails too, you will enter into the bootutil menu of the switch. Choose the menu System → System Tools → Boot Config to load the following page. Figure 4-12 Boot Config The following entries are displayed on this screen: Boot Table Se le ct: Select the unit(s). Unit: Current Startup Image : Next Startup Image: Displays the unit ID. Displays the current startup image. Select the next startup image. 30
30
4.3.1 Boot Config
On this page you can configure the boot file of the switch. When the switch is powered on, it will
start up with the startup image. If it fails, it will try to start up with the backup image. If this fails too,
you will enter into the bootutil menu of the switch.
Choose the menu
System
→
System Tools
→
Boot Config
to load the following page.
Figure 4-12 Boot Config
The following entries are displayed on this screen:
Boot Table
Select:
Select the unit(s).
Unit:
Displays the unit ID.
Current Startup
Image:
Displays the current startup image.
Next Startup Image:
Select the next startup image.