TP-Link T1700X-16TS T1700X-16TSUN V1 Installation Guide - Page 7

JetStream 10-Gigabit Smart Switch LED Status Indication Green All the fans work properly FAN Yellow Not all the fans work properly Off The switch is working abnormally Link/Act (Port 1-12) On Green There is a 10Gbps device connected to the corresponding port but no activity Flashing Data is being transmitted or received On Yellow There is a 100/1000Mbps device connected to the corresponding port but no activity Flashing Data is being transmitted or received Off No device is connected to the corresponding port On Green There is a 10Gbps device connected to the corresponding port but no activity Flashing Data is being transmitted or received Link/Act (Port 13-16) On Yellow There is a 1000Mbps device connected to the corresponding port but no activity Flashing Data is being transmitted or received Off No device is connected to the corresponding port Reset Press this button for 5seconds or above to reset the software setting back to factory default settings. 100M/1000M/10G RJ45 Port Designed to connect to the device with a bandwidth of 100Mbps, 1000Mbps or 10Gbps. Each has two corresponding Link/Act LEDs , the left one is 10Gbps and the right one is 100/1000Mbps. SFP+ Port Designed to install the SFP module. T1700X-16TS features 4 individual SFP+ ports and supports 1G or 10G SFP module connection. ■■ Rear Panel The rear panel of T1700X-16TS features a Kensington security slot, a grounding terminal and a power socket. Figure 1-2 Rear Panel Power Socket Grounding Terminal Kensington Security Slot Introduction 02