TP-Link T2600G-28MPSTL-SG3424P T2600G-28MPSUN V2 CLI Reference Guide Guide - Page 407

owner-name -- The owner of the history sample entry, ranging from 1 to 16 characters. By default, it is "monitor". number -- The maximum number of buckets desired for the RMON history group of statistics, ranging from 1 to 130. The default is 50 buckets. Command Mode Global Configuration Mode Privilege Requirement Only Admin level users have access to these commands. Example Configure the sample port as Gi1/0/2 and the sample interval as 100 seconds for the entry 1-3: T2600G-28TS(config)# rmon history 1-3 interface gigabitEthernet 1/0/2 interval 100 owner owner1 41.14 rmon event Description The rmon event command is used to configure the entries of SNMP-RMON Event. To return to the default configuration, please use no rmon event command. Event Group, as one of the commonly used RMON Groups, is used to define RMON events. Alarms occur when an event is detected. Syntax rmon event index [ user user-name ] [ description descript ] [ type { none | log | notify | log-notify }] [ owner owner-name ] no rmon event index Parameter index -- The index number of the event entry, ranging from 1 to 12. You can only select one entry for each command. user-name -- The name of the User to which the event belongs, ranging from 1 to 16 characters. By default, it is "public". descript -- The description of the event, ranging from 1 to 16 characters. By default, it is empty. type -- The event type, with none, log, notify and both options. None indicates no processing, log indicates logging the event, notify indicates 386