TP-Link T2600G-28MPSTL-SG3424P T2600G-28MPSUN V2 CLI Reference Guide Guide - Page 492

power inline disconnect-method {deny-next-port|deny-low-priority} Parameter deny-next-port -- When the supply power exceeds the power limit, the PD linked to the next port will be disconnected. deny-low priority -- When the supply power exceeds the power limit, the PD linked to the port with lower priority will be disconnected. Command Mode Global Configuration Mode Privilege Requirement None. Example Configure the power disconnect method as deny-next-port: T2600G-28MPS(config)# power inline disconnect-method deny-next-port 49.3power profile Description The power profile command is used to create a PoE profile for the switch. To delete the configured PoE profile configuration, please use no power profile command. PoE Profile is a short cut for the configuration of the PoE port. In a PoE profile, the PoE status, PoE priority and power limit are configured. You can specify a PoE profile for each PoE port individually. Syntax power profile name [supply {enable | disable} [priority {low | middle | high} [consumption { power-limit | auto | class1 | class2 | class3 | class4 } ] ] ] no power profile name Parameter name -- The PoE profile name, ranging from 1 to 16 characters. If the name being assigned contains spaces then put it inside double quotes. supply -- The PoE status of the port in the profile. By default, the PoE status is "enable". priority -- The PoE priority of the port in the profile. The priority levels include "high", "middle" and "low" in descending order. When the supply power exceeds the system power limit, the PD linked to the port with lower priority will be disconnected. By default, the PoE priority is "low". 471