TP-Link T2600G-52TS Jetstream L2 Managed SwitchUN Installation Guide - Page 12
Installation
View all TP-Link T2600G-52TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
JetStream L2 Managed Switch Chapter 2 Installation 2.1 Package Contents Make sure that the package contains the following items. If any of the listed items is damaged or missing, contact your distributor. One Switch One Power Cord, One Console Cable and One USB Cable Installation Guide Business Networking Solution Installation Guide One Resouce CD Two mounting brackets, eight screws and four rubber feet Note: The USB Cable is not provided with TL-SG5412F/T2500-28TC. The power cord is not provided with T2600G-28TS-DC. 2.2 Safety Precautions To avoid any device damage and bodily injury caused by improper use, you should observe the following rules. ■■ Safety Precautions ■■ Keep the power off during the installation. ■■ Wear an ESD-preventive wrist strap, and make sure that the wrist strap has a good skin contact and is well grounded. ■■ Use only the power cord provided with the switch. ■■ Make sure that the supply voltage matches the specifications indicated on the rear panel of the switch. ■■ Ensure that the switch is installed in a well-ventilated environment and its ventilation hole is not blocked. ■■ Do not open or remove the cover of the switch. ■■ Before cleaning the device, cut off the power supply. Do not clean it by the waterish cloth, and never use any other liquid cleaning method. ■■ Place the device with its bottom surface downward. 08 Installation