TP-Link T2600G-52TS Jetstream L2 Managed SwitchUN Installation Guide - Page 18
Verify Installation
View all TP-Link T2600G-52TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
JetStream L2 Managed Switch Connect the Console (RJ-45) port of the device with your computer by the console cable as the following figure shows. Figure 3-3 Connecting the Console (RJ-45) Port Console(RJ45) Connect the Console (USB) port of the device with your computer by the USB cable as the following figure shows. Figure 3-4 Connecting the Console (USB) Port Console(USB) T2600G-28TS Note: ■■ Console (RJ-45) port and Console (USB) port cannot be used concurrently. Console (USB) port takes priority over the Console (RJ-45) port. ■■ The Console (USB) port is hot-pluggable while the Console (RJ-45) port is not. Keep the device power off when plugging the console cable into the Console (RJ-45) port. ■■ Do not connect the console port with other ports by RJ45 cable. ■■ TL-SG5412F and T2500-28TC do not have a Console (USB) port. 3.4 Verify Installation After completing the installation, verify the following items: ■■ There should be 5 to 10 cm of clearance around the device for ventilation and make sure the air flow is adequate. ■■ The voltage of the power supply meets the requirement of the input voltage of the device. ■■ The power socket, device and rack are well grounded. ■■ The device is correctly connected to other network devices. 14 Connection