TP-Link TD-VG3511 TD-VG3511 V1 QIG 7106503943 - Page 2
WLAN: Solid, light or flashing, USB: Solid, LAN: Solid light, or flashing, ADSL: Solid, Power: Solid
View all TP-Link TD-VG3511 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
splitter to the ADSL port on the Modem Router, also have the PHONE port on the splitter connected to a telephone. Connect your telephone to the port labeled "PHONE 1~2" on the Modem Router with a telephone line. Connect your USB device to the USB port labeled "USB" on the Modem Router. Note 1. If you want to share files or use the USB Voice Mail function, please plug an external USB hard drive/USB flash disk into the USB port. To use the printer function, please connect a USB printer to the USB port. 2. To use USB Voice Mail function, please make sure the free space of the plugged external USB hard drive/USB flash disk is more than 4MB. Plug the provided Power Adapter into the Power jack on the back of the Modem Router and the other end to a standard electrical wall socket. Switch on the ON/OFF button and power on all your other network devices. Then check to see if the LEDs of the Modem Router display normally as the diagram below describes. Power: Solid WLAN: Solid light light or flashing USB: Solid light or flashing ADSL: Solid LAN: Solid light light or flashing or flashing Note If the LEDs display abnormally, please check to see if all the cable connectors (power adapter, phone line Ethernet cable and USB device) are well connected to your device. With the phone line well connected, if the ADSL LED turns off after flashing, please contact your ISP to ensure that your Internet connection is active. 2