TP-Link TL-PA101 User Guide - Page 14

TL-PA101 85Mbps Ethernet Powerline Adapter y Password: Shows the current password of the Ethernet Powerline Adapter. y Quality: Shows the quality of the Ethernet Powerline Adapter connection. y Rate (Mbps): Shows the current transmission rate of the selected Ethernet Powerline Adapter. y MAC Address: Shows the Ethernet Powerline Adapter's MAC address. ¾ Rename: Click to change the name of the selected Ethernet Powerline Adapter. ¾ Enter Password: Shows the supplied Ethernet Powerline Adapter's password (Initially left blank). To set the Ethernet Powerline Adapter password (Which is required when creating a private network), click and select the device shown in the lower panel and click on the "Enter Password" button. Follow the pop-up dialog box to complete your password setting. ¾ Add: Click this button to add a remote Ethernet Powerline Adapter to your network that is not on the lower panel displayed list. You will advice to locate the passwords for all Ethernet Powerline Adapter you wish to manage and add them to the local logical network by clicking the "Add" button. Follow the pop-up dialog box to complete your setting. ¾ Scan: Click the "Scan" button to perform an immediate search of the Ethernet Powerline Adapter connected to the computer. The Management Utility will automatically perform the scanning process and update the display every few seconds by default. 4.1.1 Rename This Management Utility allows you to change the name of the listed Ethernet Powerline Adapter. Click and select the Ethernet Powerline Adapter you wish to change from the list, then click on the "Rename" tab and editing-in-place to change the name. 4.1.2 Enter Password To set or change your Ethernet Powerline Adapter's password, click and select the Ethernet Powerline Adapter you wish to change from the list, then click on the "Enter Password" tab, the following screen display Enter your Password (Take note to the password format) and click "OK" after setup. 10