TP-Link TL-PA2010PKIT TL-PA2010PKIT V1 User Guide - Page 10

Connecting Mechanism, 2.1 Introduction, 2.2 LED Indicator - powerline

Get TP-Link TL-PA2010PKIT PDF manuals and user guides View all TP-Link TL-PA2010PKIT manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

TL-PA2010P AV200 Powerline Adapter with AC Pass Through Chapter 2 Connecting Mechanism 2.1 Introduction The Powerline Adapter supports up to 200Mbps data rate. With this high speed connection rate, this Powerline Adapter allows you to setup a high speed home network by using your home existing electrical wiring. Simply plug this Powerline Adapter into an ordinary power outlet to extend your Cable/xDSL broadband connection or existing LAN network to any other electrical outlet in any rooms of your house. Take notes that this Powerline Adapter works in pairs. You need to plug one Powerline Adapter into a power outlet for each computer (Connect to the computer LAN card) you want to connect (Network access); you will also need another Powerline Adapter connected to your Cable/xDSL broadband (Ethernet port) in order to extend your broadband connection or Internet surfing. With clean powerline, the distance between two Powerline Adapters can reach 300 meters at lease, but the actual distance may vary due to the environment. Section below describes the Powerline Adapter's LED indicators, physical interface and hardware connection mechanism. 2.2 LED Indicator The LED indicator displays information about the device's status. Item Power LED Powerline LED Status On Blinking Off On Blinking Off Indication The adapter is on. The adapter is in power-saving mode or in pairing procedure. The adapter is off. The adapter is connected to a powerline network. The adapter is transferring data. The adapter isn't connected to any powerline network or is in power-saving mode. 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
TL-PA2010P
AV200 Powerline Adapter with AC Pass Through
4
Chapter 2
Connecting Mechanism
2.1 Introduction
The Powerline Adapter supports up to 200Mbps data rate. With this high speed connection rate, this
Powerline Adapter allows you to setup a high speed home network by using your home existing
electrical wiring. Simply plug this Powerline Adapter into an ordinary power outlet to extend your
Cable/xDSL broadband connection or existing LAN network to any other electrical outlet in any rooms of
your house.
Take notes that this Powerline Adapter works in pairs. You need to plug one Powerline Adapter into a
power outlet for each computer (Connect to the computer LAN card) you want to connect (Network
access); you will also need another Powerline Adapter connected to your Cable/xDSL broadband
(Ethernet port) in order to extend your broadband connection or Internet surfing. With clean powerline,
the distance between two Powerline Adapters can reach 300 meters at lease, but the actual distance
may vary due to the environment.
Section below describes the Powerline Adapter’s LED indicators, physical interface and hardware
connection mechanism.
2.2 LED Indicator
The LED indicator displays information about the device’s status.
Item
Status
Indication
On
The adapter is on.
Blinking
The adapter is in power-saving mode or in pairing
procedure.
Power LED
Off
The adapter is off.
On
The adapter is connected to a powerline network.
Blinking
The adapter is transferring data.
Powerline LED
Off
The adapter isn’t connected to any powerline network or
is in power-saving mode.