TP-Link TL-PA2010PKIT TL-PA2010PKIT V1 User Guide - Page 21

TL-PA2010P AV200 Powerline Adapter with AC Pass Through network. Furthermore, here you can change the Name of the listed powerline adapters as well as add another device to the current network. ¾ Type: Displays the type of the remote device found in the network. ¾ Name: Displays the name of the remote device found in the network. You can change its name following two steps: select the desired adapter and click the Modify button. ¾ MAC Address: Displays the MAC address of the remote device found in the network. ¾ Password: Displays the supplied Powerline Adapter's password (Initially left blank). To set the Powerline Adapter password (Which is required when creating a private network or managing all the devices), select the device shown in the figure and click the Modify button. Follow the pop-up dialog box to complete your password setting. ¾ Rate: Shows the current transmission rate of the Powerline Adapter. ¾ Rescan: Click the "Rescan" button to perform an immediate search of the remote Powerline Adapter. The Management Utility will automatically perform the scanning process and update the display every few seconds by default. ¾ Option: Select the device and click the Modify button to display a configuration dialog. There you can change the corresponding adapter's name and enter its password for future configuration. 4.2.1 Rename the Remote Device/Enter Password You can change the name of the remote adapter to an easy-to-remember one. Additionally, you can select the desired adapter and enter its password (Take note of the password format) so as to set the network name of this device on System configuration homepage. To change the name of the remote adapter or enter its password, please follow the steps below: 15