TP-Link TL-R488T User Guide - Page 22
Quick Setup, Network - default ip
UPC - 845973040161
View all TP-Link TL-R488T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
TL-R488T Load Balance Broadband Router User Guide ¾ LAN - This field displays the current information for the LAN, including the "MAC address", "IP address" and "Subnet Mask". ¾ WAN 1~4 - This field displays the parameters applied to the WAN ports of the router, including "MAC address", "IP address", "Subnet Mask", "Default Gateway" and so on. ) Note: If PPPoE/L2TP/PPTP is chosen as the WAN connection type, the Disconnect button will be shown here while you are accessing the Internet. You can also cut the connection by clicking the button. If you have not connected to the Internet, a Connect button will be shown, and you can click the button to establish the connection. ¾ Traffic Statistics: This field displays the traffic statistics of WAN ports. ¾ System Up Time: This field displays the time of the router running from the time it is powered on or is reset. 4.2 Quick Setup Please refer to chapter 3"Quick Installation Guide". 4.3 Network Choose menu "Network", the next submenus are as shown below: Figure 4-2 Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. 4.3.1 LAN Choose menu "Network→LAN", you can configure the IP parameters of the LAN on the screen below. 17