TP-Link TL-R488T User Guide - Page 28
Use IP Address specified by ISP - download
UPC - 845973040161
View all TP-Link TL-R488T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
TL-R488T Load Balance Broadband Router User Guide Figure 4-7 ¾ MTU Size- The default MTU size is 1492 bytes, which is usually fine. For some ISPs, you need modify the MTU. This should not be done unless you are sure it is necessary for your ISP. ¾ Service Name/AC Name - The service name and AC (Access Concentrator) name should not be configured unless you are sure it is necessary for your ISP. ¾ ISP Specified IP Address - If you know that your ISP does not automatically transmit your IP address to the router during login, select Use IP Address specified by ISP and enter the IP address in dotted-decimal notation, which your ISP provided. ¾ Detect Online Interval - The default value is 0, you can input the value between 0 and 120. The router will detect Access Concentrator online at every interval between the times. If the value is 0, it means the Router does not detect. ¾ Primary DNS & Secondary DNS - If you know that your ISP does not automatically transmit DNS addresses to the router during login, select Use the following DNS servers and enter the address in dotted-decimal notation of your ISP's primary DNS server. If a secondary DNS server address is available, enter it as well. ¾ Download Bandwidth: Enter the bandwidth for download traffic. ¾ Upload Bandwidth: Enter the bandwidth for upload traffic. 23