TP-Link TL-SL2218 TL-SL2218 V1 IG 7106504093 - Page 16
Connect to Ground
View all TP-Link TL-SL2218 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Smart Switch Parallel cabling 300 2~5kVA One is in the grounded metal raceway or metal pipe 150 powerline The both are in the grounded metal raceway or metal pipe 80 Parallel cabling 600 >5kVA One is in the grounded metal raceway or metal pipe 300 powerline The both are in the grounded metal raceway or metal pipe 150 Device Switch case Transformer room Elevator tower Air-conditioner room Min Distance (m1 1.00 2.00 2.00 2.00 3333 Connect to Ground Connecting the device to ground is to quickly release the lightning over-voltage and over-current of the device, which is also a necessary measure to protect the body from electric shock. In different environments, the device may be grounded differently. The following will instruct you to connect the device to the ground in two ways, connecting to the grounding bar or connecting to the ground via the power cord. Please connect the device to ground in the optimum way according to your specific operation environment. ■■ Connecting to the Grounding Bar If the device is installed in the Equipment Room, where a grounding bar is available, you are recommended to connect the device to the grounding bar as shown in the following figure. 11 Lightning Protection Switch (Rear Panel) Ground Cable Grounding Terminal Grounding Bar FFFFFFFFFFF Connecting to the Grounding Bar