TP-Link TL-SL2218 TL-SL2218 V1 IG 7106504093 - Page 7
Port Feature, RESET, 100Mbps RJ45 Port, 100/1000Mbps RJ45 Port, SFP Port
View all TP-Link TL-SL2218 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Smart Switch LEDs LED Power System 10/100M 1000M Status On(green1 Off/ Flashing Flashing On/Off On Flashing Green Yellow On Flashing Green Yellow Indication The switch is powered on The switch is powered off or power supply is abnormal The switch works properly The switch is powered off or the switch works improperly A device is linked to the corresponding port Data is being transmitted or received The linked device is running at 100Mbps The linked device is running at 10Mbps A device is linked to the corresponding port Data is being transmitted or received The linked device is running at 1000Mbps The linked device is running at 10/100Mbps Port Feature Model 10/100Mbps RJ45 Port 10/100/1000Mbps RJ45 Port TL-SL2218 16 2 TL-SL2428 24 4 SFP Port 2(Combo1 2(Combo1 RESET With the switch powered on, press Reset button for five seconds to reset the software setting to its factory default settings. 10/100Mbps RJ45 Port Designed to connect to the device with a bandwidth of 10Mbps or 100Mbps. Each has a corresponding 10/100M LED. 10/100/1000Mbps RJ45 Port Designed to connect to the device with a bandwidth of 10Mbps, 100Mbps or 1000Mbps. Each has a corresponding 1000M LED. SFP Port Designed to install the SFP module. TL-SL2218/TL-SL2428 features some SFP transceiver slots that are shared with the associated RJ45 ports. The associated two ports are referred as a "Combo" port, which means they cannot be used simultaneously, otherwise only SFP port works. Meanwhile, the associated two ports share the same LED. For TL-SL2218, Port 17 shares the same LED with Port 17F and Port 18 shares the same LED with Port 18F; for TL-SL2428, Port 27 shares the same LED with Port 27F and Port 28 shares the same LED with Port 28F. Introduction 02