TP-Link TL-WA7510N TL-WA7510N V1 User Guide - Page 79
Factory Defaults - firmware upgrade
View all TP-Link TL-WA7510N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide 2. Enter or select the path name where you save the downloaded file on the computer into the File Name blank. 3. Click the Upgrade button. 4. The Device will reboot while the upgrading has been finished. ) Note: 1. The firmware version must correspond to the hardware. 2. The upgrade process takes a few moments and the Device restarts automatically when the upgrade is complete. 3. It is important to keep power applied during the entire process. Loss of power during the upgrade could damage the Device. 4.9.6 Factory Defaults Selecting System Tools > Factory Default allows you to restore the factory default settings for the device on the screen shown in Figure 4-41. Figure 4-41 Restore Factory Defaults Click the Restore button to reset all configuration settings to their default values. z Default User Name - admin. z Default Password - admin. z Default IP Address - 192.168.1.254. z Default Subnet Mask - 255.255.255.0. ) Note: All changed settings will be lost when defaults are restored. 71