TP-Link TL-WA830RE TL-WA830RE V1 User Guide - Page 16

TL-WA830RE, Use the following IP address, IP address, Subnet mask, Default gateway, Start > Run - manual

Get TP-Link TL-WA830RE PDF manuals and user guides View all TP-Link TL-WA830RE manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

TL-WA830RE 300Mbps Wireless N Range Extender User Guide 4. Configure the IP address manually. 1) Select Use the following IP address. 2) Enter 192.168.0.* (* is any integer between 1 to 253) into the IP address filed, 255.255.255.0 into the Subnet mask filed and 192.168.0.254 into the Default gateway filed. 3) Click OK to keep your settings. Figure 3-4 5. Verify the network connection between your PC and the AP via the Ping command. The following example is in Windows XP Operating System. 1) Click Start > Run tab. Enter cmd in the filed and click OK. 2) Type ping 192.168.0.254 on the screen that displays and then press Enter. If the result displayed is similar to that shown as Figure 3-5 below, the connection between your PC and the AP has been successfully established. Figure 3-5 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
TL-WA830RE
300Mbps Wireless N Range Extender User Guide
4.
Configure the IP address manually.
1)
Select
Use the following IP address
.
2)
Enter 192.168.0.* (* is any integer between 1 to 253) into the
IP address
filed,
255.255.255.0 into the
Subnet mask
filed and 192.168.0.254 into the
Default gateway
filed.
3)
Click
OK
to keep your settings.
Figure 3-4
5.
Verify the network connection between your PC and the AP via the Ping command. The
following example is in Windows XP Operating System.
1)
Click
Start > Run
tab. Enter
cmd
in the filed and click
OK
.
2)
Type ping
192.168.0.254
on the screen that displays and then press
Enter
.
If the result displayed is similar to that shown as Figure 3-5 below, the connection
between your PC and the AP has been successfully established.
Figure 3-5
8