TP-Link TL-WR940N User Guide - Page 11
The Rear Panel, TL-WR940N, POWER, RESET - wireless
UPC - 845973051464
View all TP-Link TL-WR940N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
TL-WR940N Wireless N Router PWRr Off Power is off. On Power is on. On The Router is initializing or maybe has a system error. SYS Flashing The Router is working properly. Off The Router has a system error. WLAN Off Flashing The Wireless function is disabled. The Wireless function is enabled. Off There is no device linked to the corresponding port. WAN, LAN 1-4 There is a device linked to the corresponding port but there is no On activity. Flashing There is an active device linked to the corresponding port. Slow Flash A wireless device is connecting to the network by QSS function. This process will last in the first 2 minutes. QSS On A wireless device has been successfully added to the network by QSS function. Quick Flash A wireless device failed to be added to the network by QSS function. Table 1-1 The LEDs description ) Note: After a device is successfully added to the network by QSS function, the QSS LED will keep on for about 5 minutes and then turn off. 1.4.2 The Rear Panel Figure 1-2 Rear Panel sketch The following parts are located on the rear panel (View from left to right). ¾ POWER: The Power socket is where you will connect the power adapter. Please use the power adapter provided with this TL-WR940N Wireless N Router. ¾ RESET: -4-