TRENDnet 12dBi User's Guide - Page 13

Web Management Interface Instructions, AP Mode Configuration, Enter, AP Mode Functions

Get TRENDnet 12dBi PDF manuals and user guides View all TRENDnet 12dBi manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

TRENDnet User's Guide Web Management Interface Instructions TEW-676APBO supports web-based configuration. Upon the completion of hardware installation, TEW-676APBO can be configured through a PC/NB by using its web browser such as Internet Explorer version 6.0.  Default IP Address : 192.168.10.100  Default IP Netmask : 255.255.255.0  Default User Name and Password : root/root The default user name and password for both root manager account and admin manager account are as follows: Mode Management Account Router AP CPE AP WDS UR + CB CPE + AP Root Root Admin Root Root Root Root Admin User Name root root admin root root root Root admin Password default default admin default default default default admin Step  IP Segment Set-up for Administrator's PC/NB Set the IP segment of the administrator's computer to be in the same range as TEW-676APBO for accessing the system. Do not duplicate the IP Address used here with IP Address of TEW-676APBO or any other device within the network Example of Segment : The valid range is 1 ~ 254 and 192.168.10.254 shall be avoided because it is already assigned to TEW-676APBO . 192.168.10.10 is used in the example below.  IP Address : 192.168.10.10  IP Netmask : 255.255.255.0  Launch Web Browser Launch web browser to access the web management interface of system by © Copyright 2012TRENDnet. All Rights Reserved. TEW-676APBO entering the default IP Address, http://192.168.10.254, in the URL field, and then press Enter.  System Login The system manager Login Page then appears. Enter "root" as User name and "root" as Password, and then click OK to login to the system; the root manager account is used as an example here.  Login Success System Overview page will appear after successful login. AP Mode Configuration When AP mode is chosen, the system can be configured as an Access Point. This section provides detailed explanation for users to configure in the AP mode with help of illustrations. In the AP mode, functions listed in the table below are also available from the Web-based GUI interface. Option System Operating Mode Wireless Utilities General Setup Profiles Settings Status System Overview Functions LAN Advanced Setup Firmware Upgrade Clients Management Virtual AP Network Utility WDS Status Time Server SNMP WDS Setup AP Mode Functions Reboot Extra Info Event Log 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
© Copyright 2012TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-676APBO
13
Web Management Interface Instructions
TEW-676APBO supports web-based configuration. Upon the completion of hardware
installation, TEW-676APBO can be configured through a PC/NB by using its web browser
such as Internet Explorer version 6.0.
Default IP Address :
192.168.10.100
Default IP Netmask :
255.255.255.0
Default User Name and Password :
root/root
The default user name and password for both root manager account and admin
manager account are as follows:
Step
IP Segment Set-up for Administrator's PC/NB
Set the IP segment of the administrator's computer to be in the same range as
TEW-676APBO for accessing the system. Do not duplicate the IP Address used here
with IP Address of TEW-676APBO or any other device within the network
Example of Segment :
The valid range is 1 ~ 254 and 192.168.10.254 shall be avoided because it is already
assigned to TEW-676APBO . 192.168.10.10 is used in the example below.
IP Address : 192.168.10.10
IP Netmask : 255.255.255.0
Launch Web Browser
Launch web browser to access the web management interface of system by
entering the default IP Address,
, in the URL field, and then
press
Enter
.
System Login
The system manager Login Page then appears.
Enter “
root
” as
User name
and “
root
” as
Password
, and then click OK to login to
the system; the root manager account is used as an example here.
Login Success
System Overview page will appear after successful login.
AP Mode Configuration
When AP mode is chosen, the system can be configured as an Access Point. This section
provides detailed explanation for users to configure in the AP mode with help of
illustrations. In the AP mode, functions listed in the table below are also available from
the Web-based GUI interface.
AP Mode Functions
Mode
Router
AP
CPE
AP
WDS
UR +
CB
CPE + AP
Management
Account
Root
Root
Admin
Root
Root
Root
Root
Admin
User Name
root
root
admin
root
root
root
Root
admin
Password
default
default
admin
default default default default
admin
Option
System
Wireless
Utilities
Status
Functions
Operating Mode
General Setup
Profiles Settings
System
Overview
LAN
Advanced Setup
Firmware
Upgrade
Clients
Management
Virtual AP
Network Utility
WDS Status
Time Server
WDS Setup
Reboot
Extra Info
SNMP
Event Log