TRENDnet 12dBi User's Guide - Page 68
Wireless LAN Network Creation, Repeater AP Setup, Enable Repeater AP
View all TRENDnet 12dBi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
TRENDnet User's Guide Wireless LAN Network Creation The network manager can configure related wireless settings, Repeater AP Setup, Security Settings, and MAC Filter Settings. Repeater AP Setup Administrators can configure ESSID, SSID broadcasting, Maximum number of client associations, security type settings and MAC Filter settings. TEW-676APBO archived and setting of AP's clients could make to associate to it. Maximum Clients : The default value is 32. You can enter the number of wireless clients that can associate to a particular SSID. When the number of client is set to 5, only 5 clients at most are allowed to connect to this Repeater AP. Security Type : Select the desired security type from the drop-down list; the options are Disable, WEP, WPA-PSK, WPA2-PSK, WPA-Enterprise, WPA2-Enterprise and WEP 802.1X. Disable : Data are unencrypted during transmission when this option is selected. WEP : Wired Equivalent Privacy(WEP) is a data encryption mechanism based on a 64-bit or 128-bit shared key. Key Length Hex ASCII 64-bit 10 characters 5 characters 128-bit 26 characters 13 characters Enable Repeater AP : By default, it's "Enable" for repeater AP. Select "Enable" to activate Repeater AP or click "Disable" to deactivate this function ESSID : Extended Service Set ID, When clients are browsing for available wireless networks, this is the SSID that will appear in the list. ESSID will determine the service type available to AP's clients associated with the specified AP. Client Isolation : By default, it's "Disable". Select "Enable", all clients will be isolated from each other, which means they can't reach each other. Hidden SSID : By default, it's "Disable". Enable this option to stop the SSID broadcast in your network. When disabled, people could easily obtain the SSID information with the site survey software and get access to the network if security is not turned on. When enabled, network security is enhanced. It's suggested to enable it after AP security settings are © Copyright 2012TRENDnet. All Rights Reserved. Authentication Method : Enable the desire option among OPEN, SHARED or WEPAUTO. Key Index : key index is used to designate the WEP key during data transmission. 4 different WEP keys can be entered at the same time, but only one is chosen. WEP Key # : Enter HEX or ASCII format WEP key value; the system supports up to 4 sets of WEP keys. 68