TRENDnet N300 Quick Installation Guide

TRENDnet N300 Manual

Get TRENDnet N300 PDF manuals and user guides View all TRENDnet N300 manuals
Add to My Manuals
Save this manual to your list of manuals

TRENDnet N300 manual content summary:

  • TRENDnet N300 | Quick Installation Guide - Page 1
    Quick Installation Guide TEW-640MB 1.01
  • TRENDnet N300 | Quick Installation Guide - Page 2
    Table of Contents English 1 1. Before You Start 1 2. Hardware Installation 2 3. Configure the TEW-640MB 3 4. Wi-Fi Protected Setup (WPS) Push Button Setup 7 Troubleshooting 9 Wireless Tips 12 Version 11.23.2010
  • TRENDnet N300 | Quick Installation Guide - Page 3
    Start Package Contents ŸTEW-640MB ŸCD-ROM (User's Guide) ŸMulti-Language Quick Installation Guide ŸPower Adapter (12V DC, 0.5A) ŸNetwork Cable (0.6m/2ft.) System Requirements ŸA computer with network adapter installed ŸWireless router (e.g. TEW-639GR) or access point (e.g TEW-690AP) ŸAn available
  • TRENDnet N300 | Quick Installation Guide - Page 4
    Setup. If your wireless router or access point does not support WPS, continue on to section 2 in the Hardware Installation. 2: Do not connect/install the TEW-640MB to your network until instructed to do so. 1. Connect one end of the provided RJ-45 network cable to one of the TEW-640MB's LAN ports
  • TRENDnet N300 | Quick Installation Guide - Page 5
    3. Configure the TEW-640MB 1. Open your web browser, type http://tew-640mb.trendnet in the Address bar, and then press Enter. 2. Enter the User Name and password and then click OK. Default Settings: User name: admin Password: admin Note: User name and Password are case sensitive. 3. The Wizard will
  • TRENDnet N300 | Quick Installation Guide - Page 6
    6. Select DHCP to have the TEW-640MB automatically obtain an IP address from your DHCP server (router). If Static IP address is selected you would need to configure the following: IP address: The assigned IP address should be similar to your network. This IP address should not be used by any other
  • TRENDnet N300 | Quick Installation Guide - Page 7
    11. Verify that your settings are correct and then click Apply. 12. Click OK. 13. Wait while your settings are being applied. 14. Click Export Setting (optional). This saves your configuration settings in a file, which can be reloaded when needed. 15. Click Save (optional). 16. Give the file a name,
  • TRENDnet N300 | Quick Installation Guide - Page 8
    manual or contact your media device's technical support for instructions. Configuration is complete For detailed information regarding the TEW-640MB's configuration and advanced settings, please refer to the Troubleshooting section, User's Guide on the Utility CD-ROM, or TRENDnet's website at http
  • TRENDnet N300 | Quick Installation Guide - Page 9
    1: Wi-Fi Protected Setup (WPS) allows you to quickly connect to your wireless router or access point. 2: Do not connect/install the TEW-640MB to your network until instructed to do so. Make sure your network adapter settings are set to obtain an IP address automatically (see troubleshooting section
  • TRENDnet N300 | Quick Installation Guide - Page 10
    media device is connected to your network. If the network setting on your media device is set to obtain an IP address automatically (dynamic IP) an IP address will be assigned automatically. Please refer to the manual or contact your media device's technical support for instructions. Configuration
  • TRENDnet N300 | Quick Installation Guide - Page 11
    get into the TEW-640MB's web configuration page? 1. Check your hardware settings again by following the instructions in section 2. 2. Make sure the Network Port and Wireless lights are lit. 3. Enter http://192.168.10.110 into the browser instead. This is the default IP address of the TEW-640MB. Make
  • TRENDnet N300 | Quick Installation Guide - Page 12
    set to obtain an IP address automatically (dynamic IP). Please refer to the manual or contact your game console's technical support for instructions. 3. Power cycle the TEW-640MB and your wireless router or wireless access point. Unplug the power to the TEW-640MB and your wireless router or wireless
  • TRENDnet N300 | Quick Installation Guide - Page 13
    the TEW-640MB. Please note that performing a reset on the TEW-640MB will erase all settings applied and will revert back to default settings. You will need to reconfigure the TEW-640MB, type http://tew-640mb.trendnet or http://192.168.10.110 into your browser and re-connect to your wireless network
  • TRENDnet N300 | Quick Installation Guide - Page 14
    choose WEP, WPA or WPA2-TKIP encryption this device may operate in legacy wireless mode (802.11b/g). You may not get 802.11n performance as these forms of encryption are not supported by the 802.11n specification. Avoid stacking hardware on top of each other to prevent overheating issues Maintain
  • TRENDnet N300 | Quick Installation Guide - Page 15
    drop the wireless signal. Although the phone may not be in use, the base can still transmit wireless signals. Move the phone's base station as far away as possible from your wireless devices. If you are still experiencing low or no signal consider repositioning the wireless devices or installing
  • TRENDnet N300 | Quick Installation Guide - Page 16
  • TRENDnet N300 | Quick Installation Guide - Page 17
  • TRENDnet N300 | Quick Installation Guide - Page 18
  • TRENDnet N300 | Quick Installation Guide - Page 19
  • TRENDnet N300 | Quick Installation Guide - Page 20
    Copyright ©2010, All Rights Reserved. TRENDnet.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
TEW-640MB
1.01
Quick Installation Guide