TRENDnet TE100-PS3plus Manual - Page 119
Changing TCP/IP Settings
View all TRENDnet TE100-PS3plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Print Server Administration User's Guide Where ip-address is the IP address you have assigned to the print server. When you first telnet to the print server, it displays its log-in message. At this point you can enter the password you have assigned to your print server. If you have not yet assigned a password, just press Enter. The print server will then display the telnet interface main menu: [Main Menu] 1 - Server Configuration 2 - Port Configuration 3 - TCP/IP Configuration 4 - AppleTalk Configuration 5 - Display Information 6 - Tools 7 - Save Configuration 0 - Quit Enter Selection: Changing TCP/IP Settings Once you have set the print server's IP address for the first time (using the method described above), you may wish to change the address or other TCP/IP configuration information such as the local network mask, the default gateway, the accepted SNMP community names, or the list of SNMP trap recipients. To change these TCP/IP settings, Appendix: Telnet Interface Administration 113