TRENDnet TE100-PS3plus Manual - Page 23

Configuration, Con Server, Port Name, Description, Speed, PJL Printer

Get TRENDnet TE100-PS3plus PDF manuals and user guides View all TRENDnet TE100-PS3plus manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

Print Server Administration User's Guide 2. Choose Server Device... from the Configuration menu, or press the Configure Server button in the toolbar. (If you have assigned a password to the server, you will have to enter it at this point.) EtherPort Admin will display the Server Device Configuration window. 3. Press the button corresponding to the port you wish to change. For parallel ports, the following dialog will be displayed: The fields that can be changed are: ◊ Port Name The name by which the port is known on various network systems. The port name should be at most 32 characters long and may consist of letters, numbers, and hyphens. Spaces are not allowed. (If the port will be used for LAN Manager clients, the port name can not exceed 8 characters.) ◊ Description A comment describing the port. ◊ Speed Determines whether or not the print server can send data to the printer at high speed. Most newer printers can accept high-speed data transmission; if your printer loses characters then you may need to choose the low-speed mode. ◊ PJL Printer Determines whether or not the printer accepts Hewlett Packard's PJL printer job control Getting Started Setting up Your Print Server 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
Print Server Administration User’s Guide
Getting Started Setting up Your Print Server
17
2.
Choose
Server Device...
from the
Configuration
menu, or
press the
Configure Server
button in the toolbar.
(If you
have assigned a password to the server, you will have to
enter it at this point.)
EtherPort Admin
will display the
Server Device Configuration window.
3.
Press the button corresponding to the port you wish to
change.
For parallel ports, the following dialog will be
displayed:
The fields that can be changed are:
◊
Port Name
The name by which the port is known on
various network systems.
The port name should be at
most 32 characters long and may consist of letters,
numbers, and hyphens.
Spaces are not allowed.
(If the
port will be used for LAN Manager clients, the port name
can not exceed 8 characters.)
◊
Description
A comment describing the port.
◊
Speed
Determines whether or not the print server can
send data to the printer at high speed.
Most newer
printers can accept high-speed data transmission; if your
printer loses characters then you may need to choose the
low-speed mode.
◊
PJL Printer
Determines whether or not the printer
accepts Hewlett Packard’s PJL printer job control