TRENDnet TE100-PS3plus Manual - Page 24
Port Name, Description, Baud Rate, Data Bits, Stop Bits, Parity Bits
View all TRENDnet TE100-PS3plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Print Server Administration User's Guide language commands. PJL allows users to get feedback on the printer's status. If the printer connected to the port supports PJL, set this field to Yes. For serial ports, the following dialog will be displayed: The fields that can be changed are: ◊ Port Name See above. ◊ Description See above. ◊ Baud Rate Sets the serial communications bit rate, in bits per second. Most printers default to 9600bps; rates from 300bps to 115200bps are available. ◊ Data Bits Sets the number of bits transmitted per byte on the serial port. Most modern printers use 8-bit data. ◊ Stop Bits Sets the number of stop bits transmitted per byte on the serial port. Most modern printers use serial protocol with 1 stop bit. ◊ Parity Bits Sets the type of parity check bit sent with each byte on the serial port. Most modern printers use a non-parity serial protocol. 18 Getting Started Setting up Your Print Server