TRENDnet TE100-PS3plus Manual - Page 22

Changing Print Server Port Settings

Get TRENDnet TE100-PS3plus PDF manuals and user guides View all TRENDnet TE100-PS3plus manuals
Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

Print Server Administration User's Guide Changing Print Server Port Settings Your TE100-PS3 network print server provides a number of parallel and/or serial printer ports. For each port, you can determine: ♦ The name of the port ♦ A comment describing the port ♦ For parallel ports, ◊ Whether or not data can be sent to the port at high speed ◊ Whether or not the attached printer supports HP's PJL (Printer Job Language) protocol. ♦ For serial ports, ◊ The serial port speed (baud rate), in bits per second. ◊ How many data bits are sent per byte ◊ How many stop bits are sent with each byte ◊ Whether or not a parity bit is sent, and if so what kind (even or odd parity) ◊ Whether or not software flow control is used (XON/XOFF) ◊ Whether or not hardware flow control should be used, and if so what kind (DTR, RTS, or DTR/RTS). To set the parameters for a printer port, 1. Select the print server in the EtherPort Admin main window's server name display (or extended server display). 16 Getting Started Setting up Your Print Server

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
Print Server Administration User’s Guide
16
Getting Started Setting up Your Print Server
Changing Print Server Port Settings
Your TE100-PS3 network print server provides a number of
parallel and/or serial printer ports.
For each port, you can
determine:
♦
The name of the port
♦
A comment describing the port
♦
For parallel ports,
◊
Whether or not data can be sent to the port at high speed
◊
Whether or not the attached printer supports HP’s PJL
(Printer Job Language) protocol.
♦
For serial ports,
◊
The serial port speed (baud rate), in bits per second.
◊
How many data bits are sent per byte
◊
How many stop bits are sent with each byte
◊
Whether or not a parity bit is sent, and if so what kind
(even or odd parity)
◊
Whether or not software flow control is used
(XON/XOFF)
◊
Whether or not hardware flow control should be used, and
if so what kind (DTR, RTS, or DTR/RTS).
To set the parameters for a printer port,
1.
Select the print server in the
EtherPort Admin
main
window’s server name display (or extended server display).