TRENDnet TEW-435BRM User Guide - Page 12

Configuration Program, Preparation - default password

Get TRENDnet TEW-435BRM - 54MBPS 802.11G Adsl Firewall M PDF manuals and user guides
UPC - 710931502558
View all TRENDnet TEW-435BRM manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

Setup Configuration Program The TEW-435BRM contains an HTTP server. This enables you to connect to it, and configure it, using your Web Browser. Your Browser must support JavaScript. The configuration program has been tested on the following browsers: • Netscape V4.08 or later • Netscape 7 • Internet Explorer V5.01 or later Preparation Before attempting to configure the TEW-435BRM, please ensure that: • Your PC can establish a physical connection to the TEW-435BRM. The PC and the TEW- 435BRM must be directly connected (using the Hub ports on the TEW-435BRM) or on the same LAN segment. • The TEW-435BRM must be installed and powered ON. • If the TEW-435BRM's default IP Address (192.168.0.1) is already used by another device, the other device must be turned OFF until the TEW-435BRM is allocated a new IP Address during configuration. Using your Web Browser To establish a connection from your PC to the TEW-435BRM: 1. After installing the TEW-435BRM in your LAN, start your PC. If your PC is already running, restart it. 2. Start your WEB browser. 3. In the Address box, enter "HTTP://" and the IP Address of the TEW-435BRM, as in this example, which uses the TEW-435BRM's default IP Address: HTTP://192.168.0.1 4. When prompted for the User name and Password, enter values as follows: • User name admin • Password password 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
Setup
9
Configuration Program
The TEW-435BRM contains an HTTP server. This enables you to connect to it, and configure
it, using your Web Browser.
Your Browser must support JavaScript
.
The configuration program has been tested on the following browsers:
•
Netscape V4.08 or later
•
Netscape 7
•
Internet Explorer V5.01 or later
Preparation
Before attempting to configure the TEW-435BRM, please ensure that:
•
Your PC can establish a physical connection to the TEW-435BRM. The PC and the TEW-
435BRM must be directly connected (using the Hub ports on the TEW-435BRM) or on
the same LAN segment.
•
The TEW-435BRM must be installed and powered ON.
•
If the TEW-435BRM's default IP Address (192.168.0.1) is already used by another device,
the other device must be turned OFF until the TEW-435BRM is allocated a new IP Ad-
dress during configuration.
Using your Web Browser
To establish a connection from your PC to the TEW-435BRM:
1.
After installing the TEW-435BRM in your LAN, start your PC. If your PC is already
running, restart it.
2.
Start your WEB browser.
3.
In the
Address
box, enter "HTTP://" and the IP Address of the TEW-435BRM, as in this
example, which uses the TEW-435BRM's default IP Address:
HTTP://192.168.0.1
4.
When prompted for the User name and Password, enter values as follows:
•
User name
admin
•
Password
password