TRENDnet TPL-402E2K User's Guide - Page 15

Chapter 4: Powerline Configuration Utility The Powerline Configuration Utility is an additional tool that allows you to centrally manage the powerline adapters that are connected to your network. Instead of using a randomly generated key with the Sync button, the utility allows you to manually configure the network name/security key for a single powerline adapter or multiple adapters simultaneously. This tool allows for easy management for multiple powerline adapters in your network. Note: 1. Before installing and using the utility, write down the 16-digit Device Password (DPW) and MAC Address of each TPL-402E powerline adapter as this will be required to apply changes to remote devices discovered in the utility. This is located on the Device Label, please refer to Section 1.4. 2. Before installing and using the utility, make sure your computer in which you are installing the utility is connected to your network and your TPL-402E adapters are also connected to your network. 3. Make sure all of the TPL-402E powerline adapters are already connected to each other using the procedures in Chapter 2: Product Installation. 4. The utility is only compatible with Windows operating systems. For details, please refer to Section 1.3. 4.1 Software Installation 1. Insert the included CD-ROM into your computer's CD-ROM drive. 2. At the CD Autorun Prompt window, click Run Autorun.exe 3. At the CD-ROM menu window, click Install Utility.