TRENDnet TV-IP344PI Users Guide - Page 13
Direct Video Stream Authentication - firmware
View all TRENDnet TV-IP344PI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
TRENDnet User's Guide Direct Video Stream Authentication: To stream the video directly without going through the configuration page, you can access it via Internet. Stream 1 Video: http://camera_ip_address:port/stream1view.htm Stream 1 Video: http://camera_ip_address:port/stream2 view.htm Enable Password Protection: - Yes: User needs to enter user name and password to stream the camera. - No: User can stream the camera without entering the username and password. - Add user: Enter the username and password to add guest users to access the camera. The guest user can only view the live view video and is not allowed to do any configuration. User List: List all users that were added into the camera. Click "Edit" to modify the user information. Click "Remove" to remove the users from the list. System >> Tools TV‐IP344PI © Copyright 2016 TRENDnet. All Rights Reserved. Firmware Upgrade: To update the firmware, click "Browse" to select the firmware, then click "Upgrade" to proceed. Please do not disconnect power or Network cable during firmware upgrading. System Reboot: Click Reboot to reboot the IP camera. Factory Reset: Click Reset to reset all the settings back to factory default value Configuration: - Backup: Click Backup to save the configuration to your computer. - Restore: Click "Browse..." to select the configure file from your computer then click Restore to restore all setting 11